There’s no denying that penetrating oil can be a true lifesaver when it comes to dealing with stuck bolts. Whether you’re dealing with a corroded nut or just a tight bolt, penetrating oils can help free them up so you can remove them without any issue. Of course, as with anything, there’s a right way and a wrong way to go about using industrial penetrating oil. In this article, you’ll discover the right way to use them so you can get the most out of your efforts.

The first thing you need to do is make sure that the area around the stuck bolt is clean. Any dirt or debris will just get in the way and make it harder for the oil to penetrate. Once the area is clean, simply apply a generous amount of penetrating oil to the bolt.

Let the oil sit for a short while so it can work its way into the threads. Once it’s had enough time to work, try to remove the bolt again. In most cases, the penetrating oil will have loosened the bolt enough that you’ll be able to remove it without any issue. If the bolt is still stuck, simply repeat the process until it comes loose. Just remember to be patient and give the oil plenty of time to work before trying to remove the bolt again. With a little patience, you’ll be able to get even the most stubborn bolts loose.

The next time you’re dealing with a stuck bolt, don’t reach for the hammer. Just grab some penetrating oil and follow the tips above and you’ll have that bolt out in no time. In most cases, you’ll be able to remove the bolt without damaging it, which is always a bonus!